Dodecylbenzenesulfonate (SDBS / LAS)
Dodecylbenzenesulfonate (SDBS / LAS)

Dodecylbenzenesulfonate (SDBS / LAS)

Sample:Free supportGet samples
Product details
Product Introduction

Product Overview

Linear Alkylbenzene Sulfonate (LAS) is the world's largest-volume anionic surfactant. In international trade it is supplied almost exclusively as LABSA — the unneutralized sulfonic acid, typically at 96% active matter, which detergent producers neutralize on site with caustic soda to form LAS salts. "LAS" and "LABSA" describe the same chemistry at different stages, not two different products.

By Chemical Form

  • LABSA 96% (Acid Slurry) — The traded form. Dark brown viscous liquid, strongly acidic (pH ~1–3), supplied at ≥96% active matter. Homologue blend based on C10–C13 linear alkyl chains, average molecular weight ~320–326 g/mol. Not used as-is — neutralized with NaOH, soda ash or TEA before formulation. Lower freight cost per active kg and no water shipped.

  • LAS (neutralized salt, e.g. Sodium LAS) — Produced on site by the formulator. Liquid, paste or powder depending on grade. No neutralization step required, simpler handling — but bulkier to ship, so less commonly traded long-distance.

Key distinction: LABSA and LAS cannot be substituted at equal weight. Compare on an active-matter basis and rebalance alkali dosage.

Specifications (LABSA 96%)

ParameterTypical
Active matter≥96% (90% / 96% / 98% grades available)
Free sulfuric acid≤1.5%
Unsulfonated matter (free oil)≤2.0%
Average molecular weight~321–326 g/mol
Colour (Klett)≤50 (grade-dependent)
CAS27176-87-0 (molecule); 68584-22-5 (blend / REACH)

Key Properties & Applications

  • Highest cleaning power per unit cost; excellent detergency against oily and particulate soils
  • High, stable foam; readily biodegradable (>90%, OECD 301) due to linear chain
  • Broad compatibility with anionic, nonionic and amphoteric surfactants
  • Applications:laundry powders and liquids, dishwashing liquids, hard-surface and industrial cleaners, textile auxiliaries, agrochemical emulsifiers, emulsion polymerization

Formulation & Handling Notes

  • Neutralization is exothermic — add acid slowly to water/caustic with agitation and cooling; ~125 g NaOH per kg LABSA
  • Corrosive (Skin Corr. 1B / Class 8 DG); HDPE or stainless storage, acid-resistant PPE required
  • Colour darkens with heat and age — specify colour and free oil if appearance matters
  • Often paired with SLES (mildness) or CAB-35 (foam) in liquid detergents

Specify on inquiry: form (LABSA vs neutralized LAS) · active matter · carbon chain distribution · colour · CAS reference.

Customer services

Sell on waimao.163.com

WhatsApp
微信