Product Overview
Sodium C14-16 Olefin Sulfonate (AOS) is a mild anionic surfactant produced by sulfonation of linear alpha-olefins. It is a sulfonate, not a sulfate ester — stable across a wide pH and temperature range, EO-free, and free of 1,4-dioxane concerns. Commercial AOS is a controlled mixture of alkene sulfonates and hydroxyalkane sulfonates. Confirm active form and grade before ordering.
By Form
AOS 92% Powder — White to pale yellow free-flowing powder or granules, ≥92% active matter, moisture ≤3–5%. Best for laundry powders, detergent tablets, dry blends and long-distance shipping (no water freight). Typical spec: unsulfated matter ≤3%, Na₂SO₄ ≤5%, pH 7.5–10.5.
AOS 35% / 38% Liquid — Clear to pale yellow liquid, ~35% or 38% active matter. Pumps and meters directly into liquid lines — no dissolution step, no dust. Best for dishwashing liquids, shampoos, hand soaps and liquid detergents. Trade-off: roughly two-thirds of each drum is water.
Key Properties
- Excellent hard-water tolerance and calcium-soap dispersion — outperforms LAS and SLES in mineral-rich water
- Rich, fast flash foam; strong detergency on oily and particulate soils
- Hydrolysis-stable sulfonate bond — suitable for acidic and alkaline systems
- Readily biodegradable (>85–90%, OECD 301); milder than LAS, no ethylene oxide
- Broad compatibility with anionic, nonionic and amphoteric surfactants; enzyme-compatible
Specification Highlights
| Parameter | AOS 92% Powder | AOS 35/38% Liquid |
|---|---|---|
| Active matter | ≥92% | 35% / 38% |
| Appearance | White / pale yellow powder | Pale yellow liquid |
| CAS | 68439-57-6 (both) | 68439-57-6 |
| INCI | Sodium C14-16 Olefin Sulfonate | Same |
| Unsulfated matter | ≤3% | ≤1.5% |
Grade note: C14–C16 is the standard cosmetic and detergent cut; C12–C18 grades available for specialized applications. Cosmetic grade requires controlled sultone (sultone residual) specification — request it on the COA.
Formulation Notes
- AOS foam breaks faster than SLES — pair with Cocamidopropyl Betaine (CAB-35) or a small SLES fraction for a creamier, more stable lather
- Tends to reduce viscosity in liquid systems — rebalance salt or rheology modifier when replacing LAS/SLES
- Not a 1:1 substitute for SLS — rebalance active level, electrolytes and thickeners
- Typically used at 4–30% depending on product type; 8–12% in compact detergents
Specify on inquiry: active form (powder / liquid) · active matter · carbon chain cut · sultone specification · target application.